 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Marketing Bulletin DATE: TO: FROM: RE: May 20, 2003 Affected Customers Mark Stoner Product Termination To all concerned parties, This bulletin is to notify all customers of the termination of the following Ecliptek series effective May 14th, 2003: Series E11C1 E13C1 E11C2 E13C2 E31C2 E32C2 Description Four Pad SMD PECL Oscillator, 5V Four Pad SMD PECL Oscillator, 3.3V Six Pad SMD PECL Oscillator, 5V Six Pad SMD PECL Oscillator, 3.3V Six Pad SMD PECL VCXO, 5V Six Pad SMD PECL VCXO, 3.3V Recommended Replacement E11J1 or E11W1 E13J1 or E13W1 E11J2 or E11W2 E13J2 or E13W2 E31J2 or E31W2 E32J2 or E32W2 Because of the circumstances surrounding this termination, there will be no end-of-life policy exercised. The series will be terminated with no purchasing or lifetime buy window available. All of us at Ecliptek Corporation apologize for any inconvenience this may have caused and can assure you we are taking measures to insure this will not happen again in the future. Best Regards, Mark W. Stoner Director of Marketing Ecliptek Corporation 3545 CADILLAC AVENUE * COSTA MESA, CA 92626-1401 * (714) 433-1200 * Fax (714) 433-1234 E11C1 Series * PECL Output Oscillators * 5.0V supply voltage * 4 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel NOTES E11C1 H 5.1 L 14.2 W 9.85 OSCILLATOR __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter MANUFACTURER CATEGORY 19.440MHz to 212.500MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 5% 100mA Maximum 100KH Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25C over 10 years 100ppm, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 20% to 80% of waveform at 50% of waveform 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect, Enable/Disable, or Complementary Output Enables Output Enables Output Disables Output: Logic Low, Disables Complementary Output: Logic High 10 mSeconds Maximum FJ = 12kHz to 20MHz SERIES PACKAGE 1 pSec Maximum VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11C1 CERAMIC 5.0V OS65 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 152 Specifications subject to change without notice. PART NUMBERING GUIDE E11C1 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over 0C to +70C D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C G=100ppm Maximum over -40C to +85C H=50ppm Maximum over -40C to +85C DUTY CYCLE 1=50% 10%, 2=50% 5% AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Complementary Output, No Connect, or Enable/Disable Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage Tolerances = 0.1 TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Marking Permanency Shock Vibration OBSOLETE Random drop on hard wooden plate 3 times from a height of 20cm. CATEGORY SERIES Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE VOLTAGE MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11C1 CERAMIC 5.0V OS65 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 153 Specifications subject to change without notice. E11C2 Series * PECL Output Oscillators * 5.0V supply voltage * 6 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel NOTES E11C2 H 5.1 L 14.2 W 9.85 OSCILLATOR __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output 20% to 80% of waveform at 50% of waveform Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25C over 10 years 19.440MHz to 212.500MHz 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 5% 100mA Maximum 100KH 100ppm, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter MANUFACTURER CATEGORY Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum FJ = 12kHz to 20MHz SERIES PACKAGE 1 pSec Maximum VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11C2 CERAMIC 5.0V OS66 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 154 Specifications subject to change without notice. PART NUMBERING GUIDE E11C2 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over 0C to +70C D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C G=100ppm Maximum over -40C to +85C H=50ppm Maximum over -40C to +85C DUTY CYCLE 1=50% 10%, 2=50% 5% MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect D=Complementary Output and Enable/Disable B=Enable/Disable E=Complementary Output (Alt. Pin Configuration) C=Complementary Output G=Complementary Output and Enable/Disable (Alt. Pin Configuration) PIN CONNECTIONS TABLE TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Marking Permanency Shock Vibration OBSOLETE CATEGORY SERIES Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE VOLTAGE MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E11C2 CERAMIC 5.0V OS66 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 155 Specifications subject to change without notice. E13C1 Series * PECL Output Oscillators * 3.3V supply voltage * 4 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel NOTES E13C1 H 5.1 L 14.2 W 9.85 OSCILLATOR __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter MANUFACTURER CATEGORY 19.440MHz to 212.500MHz 0C to 70C or -40C to 85C -55C to 125C 3.3VDC 5% 75mA Maximum 100KH Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25C over 10 years 100ppm, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 20% to 80% of waveform at 50% of waveform 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect, Enable/Disable, or Complementary Output Enables Output Enables Output Disable Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum FJ = 12kHz to 20MHz SERIES PACKAGE 1 pSec Maximum VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13C1 CERAMIC 3.3V OS63 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 156 Specifications subject to change without notice. PART NUMBERING GUIDE E13C1 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over 0C to +70C D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C G=100ppm Maximum over -40C to +85C H=50ppm Maximum over -40C to +85C DUTY CYCLE 1=50% 10%, 2=50% 5% AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect B=Enable/Disable C=Complementary Output MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 1: Complementary Output, No Connect, or Enable/Disable Pin 2: Case Ground Pin 3: Output Pin 4: Supply Voltage Tolerances = 0.1 TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability OBSOLETE Specification CATEGORY SERIES Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE Marking Permanency Shock Vibration Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13C1 CERAMIC 3.3V OS63 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 157 Specifications subject to change without notice. E13C2 Series * PECL Output Oscillators * 3.3V supply voltage * 6 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel NOTES E13C2 H 5.1 L 14.2 W 9.85 OSCILLATOR __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ OBSOLETE _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Logic Control / Additional Output 20% to 80% of waveform at 50% of waveform Inclusive of Operating Temp Range, Supply Voltage, Load, and Aging @25C over 10 years 19.440MHz to 212.500MHz 0C to 70C or -40C to 85C -55C to 125C 3.3VDC 5% 75mA Maximum 100KH 100ppm, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect, Enable/Disable, Complementary Output, or Complementary Output and Enable/Disable Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Start Up Time RMS Phase Jitter MANUFACTURER CATEGORY Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum FJ = 12kHz to 20MHz SERIES PACKAGE 1 pSec Maximum VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13C2 CERAMIC 3.3V OS64 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 158 Specifications subject to change without notice. PART NUMBERING GUIDE E13C2 F 2 C - 155.520M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE C=100ppm Maximum over 0C to +70C D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C G=100ppm Maximum over -40C to +85C H=50ppm Maximum over -40C to +85C DUTY CYCLE 1=50% 10%, 2=50% 5% MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS AVAILABLE OPTIONS Blank=Tubes TR=Tape and Reel (Standard) FREQUENCY LOGIC CONTROL/ADDITIONAL OUTPUT A=No Connect D=Complementary Output and Enable/Disable B=Enable/Disable E=Complementary Output (Alt. Pin Configuration) C=Complementary Output G=Complementary Output and Enable/Disable (Alt. Pin Configuration) PIN CONNECTIONS TABLE SUGGESTED SOLDER PAD LAYOUT TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Marking Permanency Shock Vibration OBSOLETE Random drop on hard wooden plate 3 times from a height of 20cm. CATEGORY SERIES Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE VOLTAGE MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E13C2 CERAMIC 3.3V OS64 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 159 Specifications subject to change without notice. E31C2 Series * PECL Output VCXO * 5.0V supply voltage * 6 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Additional Output / Logic Control 20% to 80% of waveform at 50% of waveform Load, and Aging @25C over 10 years E31C2 H 5.1 L 14.2 W 9.85 OSCILLATOR 19.440MHz to 83.333MHz OBSOLETE 0C to 70C or -40C to 85C -55C to 125C 5.0VDC 5% 100mA Maximum 100KH Inclusive of Operating Temp Range, Supply Voltage, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect and Single Output Enable/Disable and Single Output No Connect and Complementary Output or Enable/Disable and Complementary Output Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum Start Up Time RMS Phase Jitter Absolute Pull Range (APR) Linearity Control Voltage (VC): Test Conditions for APR Control Voltage Range (VCR) Center Control Voltage Transfer Function Input Impedance Modulation Bandwidth MANUFACTURER CATEGORY FJ = 12kHz to 20MHz Load, and Aging @25C over 10 years 1 pSec Maximum Inclusive of Operating Temp Range, Supply Voltage, 50ppm Minimum 20%, 15%, or 10% Maximum 2.5VDC 2.0VDC 0.0VDC to VCC 2.5VDC Positive Transfer Characteristic 50kOhms Typical at -3dB with Control Voltage of +2.5VDC SERIES PACKAGE VOLTAGE 10kHz Minimum CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E31C2 CERAMIC 5.0V OS68 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 188 Specifications subject to change without notice. PART NUMBERING GUIDE E31C2 F 3 A 2 C - 77.760M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C H=50ppm Maximum over -40C to +85C APR 3=50ppm Minimum LINEARITY A=20% B=15% C=10% MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS AVAILABLE OPTIONS Blank=Tubes TR = Tape and Reel (Standard) FREQUENCY ADDITIONAL OUTPUT/LOGIC CONTROL A=No Connect and Single Output B=Enable/Disable and Single Output C=No Connect and Complementary Output D=Enable/Disable and Complementary Output DUTY CYCLE 1=50 10(%), 2=50 5(%) SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Pin 1: Voltage Control Pin 2: Enable/Disable or No Connect Pin 3: Case Ground TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 4: Output Pin 5: Complementary Output or No Connect Pin 6: Supply Voltage Tolerances = 0.1 TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Marking Permanency Shock Vibration OBSOLETE CATEGORY SERIES Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Random drop on hard wooden plate 3 times from a height of 20cm. Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE VOLTAGE MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E31C2 CERAMIC 5.0V OS68 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 189 Specifications subject to change without notice. E32C2 Series * PECL Output VCXO * 3.3V supply voltage * 6 pad ceramic SMD package with J-leads * Stability to 20ppm * Output Enable/Disable available * Complementary Output available * Available on Tape and Reel ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage (VCC) Input Current Logic Type Frequency Tolerance / Stability Output Voltage Logic High (VOH) Output Voltage Logic Low (VOL) Rise Time / Fall Time Duty Cycle Load Drive Capability Additional Output / Logic Control 20% to 80% of waveform at 50% of waveform Load, and Aging @25C over 10 years E32C2 H 5.1 L 14.2 W 9.85 OSCILLATOR 19.440MHz to 83.333MHz OBSOLETE 0C to 70C or -40C to 85C -55C to 125C 3.3VDC 5% 75mA Maximum 100KH Inclusive of Operating Temp Range, Supply Voltage, 50ppm, 25ppm, or 20ppm Maximum VCC-1.025VDC Minimum VCC-1.620VDC Maximum 2 nSeconds Maximum 50 10(%) 50 5(%) 50 Ohms into VCC-2.0VDC No Connect and Single Output Enable/Disable and Single Output No Connect and Complementary Output or Enable/Disable and Complementary Output Enable/Disable Input Voltage VIL of VCC-1.475VDC Maximum No Connection VIH of VCC-1.165VDC Minimum Enables Output Enables Output Disables Output: Logic Low Disables Complementary Output: Logic High 10 mSeconds Maximum Start Up Time RMS Phase Jitter Absolute Pull Range (APR) Linearity Control Voltage (VC): Test Conditions for APR Control Voltage Range (VCR) Center Control Voltage Transfer Function Input Impedance Modulation Bandwidth MANUFACTURER CATEGORY FJ = 12kHz to 20MHz Load, and Aging @25C over 10 years 1 pSec Maximum Inclusive of Operating Temp Range, Supply Voltage, 50ppm Minimum 20%, 15%, or 10% Maximum 1.65VDC 1.35VDC 0.0VDC to VCC 1.65VDC Positive Transfer Characteristic 50kOhms Typical at -3dB with Control Voltage of +1.65VDC SERIES PACKAGE VOLTAGE 10kHz Minimum CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E32C2 CERAMIC 3.3V OS67 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 190 Specifications subject to change without notice. PART NUMBERING GUIDE E32C2 F 3 A 2 C - 77.760M TR FREQUENCY TOLERANCE & STABILITY/ OPERATING TEMPERATURE RANGE D=50ppm Maximum over 0C to +70C E=25ppm Maximum over 0C to +70C F=20ppm Maximum over 0C to +70C H=50ppm Maximum over -40C to +85C APR 3=50ppm Minimum LINEARITY A=20% B=15% C=10% MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS AVAILABLE OPTIONS Blank=Tubes TR = Tape and Reel (Standard) FREQUENCY ADDITIONAL OUTPUT/LOGIC CONTROL A=No Connect and Single Output B=Enable/Disable and Single Output C=No Connect and Complementary Output D=Enable/Disable and Complementary Output DUTY CYCLE 1=50 10(%), 2=50 5(%) SUGGESTED SOLDER PAD LAYOUT ALL DIMENSIONS IN MILLIMETERS Pin 1: Voltage Control Pin 2: Enable/Disable or No Connect Pin 3: Case Ground TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS Pin 4: Output Pin 5: Complementary Output or No Connect Pin 6: Supply Voltage Tolerances = 0.1 TAPE A 24 .3 B 11.5 .1 C 10.75 .1 D 4 .2 E 2.1 F REEL M 1.5 MIN N 50 MIN O 20.2 MIN P 13.2 Q 40 MIN QTY/REEL 1000 F 12 .1 G B0* H 1.5 +.1-0 J A0* K .4 .05 L K0* R 2.5 MIN S 10 MIN T 30.4 MAX U 360 MAX V 24.4+2-0 *Compliant to EIA 481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS MARKING SPECIFICATIONS Characteristic Seal Integrity Solderability Specification Bubble test in Perfluorocarbon at +125C 5C for 60 seconds minimum (internal crystal only). Sn63 Solder dip at +230C 5C for 5 seconds/95% coverage. 10 Strokes with brush after 1 minute soak in solvent, 3 times. Line 1: ECLIPTEK Line 2: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Marking Permanency Shock Vibration OBSOLETE Random drop on hard wooden plate 3 times from a height of 20cm. CATEGORY SERIES Line 3: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. PACKAGE VOLTAGE MANUFACTURER CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR E32C2 CERAMIC 3.3V OS67 10/02 800-ECLIPTEK www.ecliptek.com for latest revision 191 Specifications subject to change without notice. |
Price & Availability of E11C2G2E-155520M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |